Drawing Dartboard Dimensions and Sizes

Over the years the regional variation on ‘Hockey’ or ‘Oche’ length has always been an issue with players moving from one County to another. Throwing distances have been anything from 6’- 9’, most common 7’, 7’2″, 7’6″, 8’ and http://electronic-dart-board.blogspot.com/ 9’ So why is the official length 7’ 9 ¼” 2.37m?

Each dartboard comes with its own specific measurements and once you become acquainted with each arachnid dartboard, you’ll know which specific measurement to use when you next break out the board for you and your friends.

The dartboard is to be mounted exactly 5 feet 8 inches from the floor to the center of the bullseye. These are the measurements when playing on a traditional dartboard or steel tip darts. For added confirmation you can measure the diagonal distance from the center of the bullseye to the back of the throwline. This should come out to 9 feet 7 and ½ inches.

The Single segment portion of the Cricket number scores one (1) mark. MPR – Marks Per Round –The system for averaging the marks a player throws each turn in a game of Cricket. Mark – Any throw that registers on a number either to help close the number or score points in Cricket. The higher the MPR, the better the player. The outer portion of the Bull’s Eye scores one (1) mark and the inner section scores two (2) marks. The Double segment scores two (2) MARKS, WHILE THE Triple segment scores three (3) marks.

The Winmau Blade 5 has a 14% thinner wiring system than the previous generation Blade 4 for higher scoring potential. The Blade 5 also has an improved bullseye with carbon diffusion technology. With the 30 degree reduction in razor wire angle, the Blade 5 has reduced bounce-outs and improved dart deflection.

However, if you are looking to set up a standard World Darts Federation-approved game in make your own dart board kitchen or living room (although maybe look to cover the walls first) then you’ll want to have 5ft 8inches between the floor and your bullseye and 7ft 9.25inches between you and the front of the board.

These dart boards also have a lot more variations in game modes, some of them have hundreds of different variations. electronic dartboard dart boards also often do a lot of the scoring automatically, taking some of the complex mental arithmetic out of the game. This is especially good for children.

To protect the wall, place the board in a cabinet or at least add a piece of plywood (4×4 and quarter-inch thick) behind it. If you want to feel like in a pub, acquire three yards of green felt and spread it onto the wall.

So, to mount your dartboard on a wall, you’ll need an electric drill, a pencil, and a tape measure. You’ll also need 3 mounting feet, 1 mounting bracket, 3 stabilizer screws, and 2 mounting bracket screws.

About Author

client-photo-1
andretulloch

Comments

Leave a Reply